How to Manage a Droplet's Kernel

Validated on 28 Aug 2019 • Last edited on 24 Jan 2025

DigitalOcean Droplets are Linux-based virtual machines (VMs) that run on top of virtualized hardware. Each Droplet you create is a new server you can use, either standalone or as part of a larger, cloud-based infrastructure.

All Droplets created after March 2017 use internal kernels by default, and older Droplets can be configured to support internal kernels with the DigitalOcean GrubLoader kernel.

If you’re not sure whether your Droplet manages its kernels internally, visit its detail page in the control panel and click Kernel in the menu. If the kernel management page has the following message, your Droplet is set to use internal kernels natively:

The kernel for this Droplet is not managed within the control panel. Instead, you can upgrade the kernel from within the Droplet.

If you see a Select a Kernel menu with a Change button and the following description instead, your Droplet is using legacy external kernel management:

This will update your configuration. Then power off the server from the command line and boot it from the control panel and the new kernel will be active. To revert, select ‘Original Kernel’ and follow the same process.

If your Droplet is using legacy kernel management, you can switch to the DigitalOcean GrubLoader kernel to support internal kernels.

Switch to an Internal Kernel

Use the DigitalOcean GrubLoader kernel to allow a legacy Droplet with external kernel management to use internally-managed kernels.

How to Upgrade to the Latest Kernel

Upgrade a Droplet’s internal kernel to the latest supported version.

How to Boot into a Specific Kernel Version

Modify your Droplet to boot into a specific, non-default kernel version.

Changing a Droplet Kernel with the CLI

When changing the kernel using the command line, you must provide a value for the --kernel-id flag. You can get this value by calling doctl compute droplet kernels to get a list of the available kernels for your Droplet.

How to Change the Kernel Using the DigitalOcean CLI
  1. Install doctl, the official DigitalOcean CLI.
  2. Create a personal access token and save it for use with doctl.
  3. Use the token to grant doctl access to your DigitalOcean account. 
    doctl auth init
  4. Finally, run doctl compute droplet-action change-kernel. Basic usage looks like this, but you can read the usage docs for more details: 
    doctl compute droplet-action change-kernel <droplet-id> [flags]

Changing a Droplet Kernel with the API

Below are generic instructions for initiating a Droplet action using the API. You need to specify the change_kernel action type when calling this endpoint. For more details, see the documentation for initiating Droplet actions with the DigitalOcean API. You also need to retrieve a list of available kernels for your Droplet so you can pass in the desired kernel ID.

How to Change the Kernel Using the DigitalOcean API
  1. Create a personal access token and save it for use with the API.
  2. Send a POST request to https://api.digitalocean.com/v2/droplets/{droplet_id}/actions.

cURL

Using cURL:

# Enable Backups
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"enable_backups"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Disable Backups
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"disable_backups"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Reboot a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"reboot"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Power cycle a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"power_cycle"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Shutdown and Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"shutdown"}' \
  "https://api.digitalocean.com/v2/droplets/3067649/actions"

# Power off a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"power_off"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Power on a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"power_on"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Restore a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"restore", "image": 12389723 }' \
  "https://api.digitalocean.com/v2/droplets/3067649/actions"

# Password Reset a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"password_reset"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Resize a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"resize","size":"1gb"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Rebuild a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"rebuild","image":"ubuntu-16-04-x64"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Rename a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"rename","name":"nifty-new-name"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Change the Kernel
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"change_kernel","kernel":991}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Enable IPv6
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"enable_ipv6"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Enable Private Networking
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"enable_private_networking"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Snapshot a Droplet
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"snapshot","name":"Nifty New Snapshot"}' \
  "https://api.digitalocean.com/v2/droplets/3164450/actions"

# Acting on Tagged Droplets
curl -X POST \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  -d '{"type":"enable_backups"}' \
  "https://api.digitalocean.com/v2/droplets/actions?tag_name=awesome"

# Retrieve a Droplet Action
curl -X GET \
  -H "Content-Type: application/json" \
  -H "Authorization: Bearer $DIGITALOCEAN_TOKEN" \
  "https://api.digitalocean.com/v2/droplets/3164444/actions/36804807"

Go

Using Godo, the official DigitalOcean API client for Go:

import (
    "context"
    "os"

    "github.com/digitalocean/godo"
)

func main() {
    token := os.Getenv("DIGITALOCEAN_TOKEN")

    client := godo.NewFromToken(token)
    ctx := context.TODO()
// Enable Backups
    action, _, err := client.DropletActions.EnableBackups(ctx, 3164450)

// Disable Backups
//  action, _, err := client.DropletActions.DisableBackups(ctx, 3164450)

// Reboot a Droplet
//  action, _, err := client.DropletActions.Reboot(ctx, 3164450)

// Power Cycle a Droplet
//  action, _, err := client.DropletActions.PowerCycle(ctx, 3164450)

// Shutdown a Droplet
//  action, _, err := client.DropletActions.Shutdown(ctx, 3067649)

// Power Off a Droplet
//  action, _, err := client.DropletActions.PowerOff(ctx, 3164450)

// Power On a Droplet
//  action, _, err := client.DropletActions.PowerOn(ctx, 3164450)

// Restore a Droplet
//  action, _, err := client.DropletActions.Restore(ctx, 3164449, 12389723)

// Password Reset a Droplet
//  action, _, err := client.DropletActions.PasswordReset(ctx, 3164450)

// Resize a Droplet
//  action, _, err := client.DropletActions.Resize(ctx, 3164450, "1gb", true)

// Rebuild a Droplet
//  action, _, err := client.DropletActions.RebuildByImageSlug(ctx, 3164450, "ubuntu-16-04-x64")

// Rename a Droplet
//  action, _, err := client.DropletActions.Rename(ctx, 3164450, "nifty-new-name")

// Change the Kernel
//  action, _, err := client.DropletActions.ChangeKernel(ctx, 3164450, 991)

// Enable IPv6
//  action, _, err := client.DropletActions.EnableIPv6(ctx, 3164450)

// Enable Private Networking
//  action, _, err := client.DropletActions.EnablePrivateNetworking(ctx, 3164450)

// Snapshot a Droplet
//  action, _, err := client.DropletActions.Snapshot(ctx, 3164450, "Nifty New Snapshot")

// Retrieve a Droplet Action
//  action, _, err := client.DropletActions.Get(ctx, 3164450, 36804807)

}

Ruby

Using DropletKit, the official DigitalOcean API client for Ruby:

require 'droplet_kit'
token = ENV['DIGITALOCEAN_TOKEN']
client = DropletKit::Client.new(access_token: token)

# Enable Backups
client.droplet_actions.enable_backups(droplet_id: 3164450)

# Disable Backups
# client.droplet_actions.disable_backups(droplet_id: 3164450)

# Reboot a Droplet
# client.droplet_actions.reboot(droplet_id: 3164450)

# Power Cycle a Droplet
# client.droplet_actions.power_cycle(droplet_id: 3164450)

# Shutdown a Droplet
# client.droplet_actions.shutdown(droplet_id: 3067649)

# Power Off a Droplet
# client.droplet_actions.power_off(droplet_id: 3164450)

# Power On a Droplet
# client.droplet_actions.power_on(droplet_id: 3164450)

# Restore a Droplet
# client.droplet_actions.restore(droplet_id: 3067649, image: 12389723)

# Password Reset a Droplet
# client.droplet_actions.password_reset(droplet_id: 3164450)

# Resize a Droplet
# client.droplet_actions.resize(droplet_id: 3164450, size: '1gb')

# Rebuild a Droplet
# client.droplet_actions.rebuild(droplet_id: 3164450, image: 'ubuntu-16-04-x64')

# Rename a Droplet
# client.droplet_actions.rename(droplet_id: 3164450, name: 'nifty-new-name')

# Change the Kernel
# client.droplet_actions.change_kernel(droplet_id: 3164450, kernel: 991)

# Enable IPv6
# client.droplet_actions.enable_ipv6(droplet_id: 3164450)

# Enable Private Networking
# client.droplet_actions.enable_private_networking(droplet_id: 3164450)

# Snapshot a Droplet
# client.droplet_actions.snapshot(droplet_id: 3164450, name: 'Nifty New Snapshot')

Python

Using PyDo, the official DigitalOcean API client for Python:

import os
from pydo import Client

client = Client(token=os.environ.get("DIGITALOCEAN_TOKEN"))

# enable back ups example
req = {
  "type": "enable_backups"
}

resp = client.droplet_actions.post(droplet_id=346652, body=req)

We can't find any results for your search.

Try using different keywords or simplifying your search terms.